Clarity CL01 User Guide

Jrumz Clarity CL01 – User Guide Skip to content
User Guide

Jrumz Clarity CL01 – Active Noise Canceling Headphones

Quick-start, pairing, ANC & Ambient modes, wired listening, battery & charging, troubleshooting, and care.

What's in the Box

  • Clarity CL01 Active Noise Canceling Bluetooth Headphones
  • Carry case
  • USB-C charging cable
  • 3.5 mm audio cable
  • 6.3 mm adapter & in-flight adapter
Up to 18 hrs
Bluetooth + ANC
Up to 20 hrs
Bluetooth only
Up to 35 hrs
ANC only

Headphone Controls

Power

  • Power on: Press and hold the Power button for 3 seconds (you'll hear a tone and see a blue LED).
  • Power off: Press and hold the Power button for 3 seconds until you hear the shutdown tone.

Music playback

  • Play/Pause: Press the multifunction button.
  • Next track: Hold + for 2 seconds.
  • Previous track: Hold for 2 seconds.
  • Volume: Tap + or .

Calls

  • Answer/End: Press the multifunction button.
  • Reject: Hold the multifunction button for 2 seconds.
  • Redial last: Double-press the multifunction button.
  • Mute/Unmute: Hold the multifunction button for 3 seconds during a call.

Bluetooth Connections

Pair a new device

  1. Power on the headphones.
  2. Open Bluetooth settings on your phone/tablet/computer.
  3. Select “Jrumz Clarity CL01” and confirm pairing.

Manage connections

  • Disconnect: Turn off Bluetooth on your device or press the multifunction button.
  • Reconnect: Turn Bluetooth back on and select the headphones again.
  • Clear pairing list (reset): Hold the multifunction button + for 5 seconds.

Wired Listening

For zero-latency listening, connect the included 3.5 mm audio cable between your device and the headphone jack. Bluetooth is not required in wired mode.

Noise Canceling & Ambient Sound

  • Toggle modes: Press the ANC/AMB button once to switch between Active Noise Canceling and Ambient Sound.
  • ANC: Reduces external noise for immersive listening.
  • Ambient: Lets outside sound in so you can hear your surroundings.

Charging & Status Indicators

Charge the headphones

  1. Connect the USB-C cable to the charging port.
  2. Plug into a USB power source. A full charge takes ~3 hours.
LED status Meaning
Flashing blue Powered on / connected
Flashing red/blue Pairing mode
Solid red Charging
Off Fully charged

Troubleshooting

  • No sound: Check device volume; verify the headphones are powered on and connected.
  • Bluetooth sound cuts out: Stay within 10 m / 33 ft; move away from Wi-Fi routers or other interference sources.
  • Won't power on: Charge the headphones fully and try again.
  • Weak noise canceling: Ensure ANC is on and the earcups form a snug seal over your ears.
Tip: For stubborn issues, reset by clearing the pairing list (multifunction + for 5 seconds) and pair again.

Care & Safety

  • Store headphones in the carry case when not in use.
  • Clean with a soft, dry cloth.
  • Avoid extreme heat, cold, humidity, fire, and crushing pressure.
  • For RF safety, use at least 20 cm (8 in) from the body.

Help & FAQ

How do I pair my CL01?
Power on the headphones → open Bluetooth settings → select “Jrumz Clarity CL01” → confirm pairing.
Can I use the headphones wired?
Yes. Use the included 3.5 mm cable between your device and the headphone jack for wired listening.
How do I toggle ANC and Ambient?
Press the ANC/AMB button once to switch between Active Noise Canceling and Ambient Sound modes.
How long does the battery last?
Up to 18 hours (Bluetooth + ANC), up to 20 hours (Bluetooth only), or up to 35 hours (ANC only). Charging takes ~3 hours via USB-C.
How do I reset or clear Bluetooth devices?
Hold the multifunction button and the button together for 5 seconds to clear the pairing list.
Who can I contact for support?

© Jrumz. Clarity CL01 is designed by an audiologist for comfortable, clear audio at safer listening levels.